1998-2004 Honda Foreman 450 factory service manual, Page 187Get this manual
GEARSHIFT LINKAGE Install the sub-gearshift spi ndle and thrust washer to the rear crankcaseIf reverse stopper arm was removed, it must be installed before sub-gearshift spindle (page 9-8)
Instal the thrust washer onto the sub-gearshift spindleInstall the return spring, washer and stopper arm into the crankcase so that arm lies below bearing edgeInstall and tighten the stopper arm boltTORQUE: 12 Nm (1 .2 kgf.m, 9lbfoft) If the return spring pin was removed, apply locking agent to the threads and install itTORQUE: 22 Nm (2.2 kgf.m, 1SIbfoftl Install the dowel pin on the gearshift drumInstalt the drum shifter wh le holding the stopper arm using screwdriver