1998-2004 Honda Foreman 450 factory service manual, Page 79Get this manual
MAINTENANCE Raise the front wheels off the ground by placing support block under the vehicleRemove the inspection hole cap and line up the hole with one of the brake adjusters and turn the brake shoe adjusters up with screwdriver until the shoes lock, then back off three stepsSpin the wheel manually to make sure the brake does not dragLine up the inspection hole with the second adjusters and repeat the procedu reo Adjust both wheelsNOTE: There are two adjusters each front wheel Adjust all four adjustersRecheck the brake lever free playIf free play is still excessive after adjusting the brake lining clearance, there is probably air in the brake system and it must be bled out (section 14) After checking, install the inspection hole cap securely in the drum while pushing the cap with screwdriver