1998-2004 Honda Foreman 450 factory service manual, Page 76Get this manual
MAINTENANCE If there is no oil flow, remove the oil fil ler cap and add oil slowly through the oil filler hole until the oil starts to flow out of theoil check bolt hole
RECOMMENDED Oil: Hypoid gear oil SAE #80
Check for leak if the oil level was low
Coat new O-ring with grease and install it onto the oil filler capInstall and tighten the oil filler cap
TORQUE: 12 Nm (1.2 kgf.m, Ibf.ft)
Front Differential Remove the oil filler capCheck that the oil level is up to lower edge of the oil filler hole