1998-2004 Honda Foreman 450 factory service manual, Page 17Get this manual
GENERAL INFORMATION
TORQUE VALUES
FASTENER TYPE mm hex bolt and nut mm hex bolt and ut mm hex bolt and nut 10 mm hex bolt and nut 12 mm hex bolt and nut TORQUE Nom (kgfm, Ibfoft) (0.5, 3.6) 10 (1.0, 7) 22 (2.2,16) 34 (3.5, 25) 54 (5.5, 40) FASTENER TYPE mm screw mm screw mm flange bolt (8 mm head) mm flange bolt (10 mm head) and nut mm flange bolt and nut 10 mm flange bolt and nut TORQUE Nom (kgfom, Ibfoft) (0.4, 2.9) (0.9, 6.5) (0.9, 6.5) 12(1.2,9) 26 (2.7, 20) 39 (4.0, 29)
o Torque specificatons listed below are for important fastenerso Others shou ld be tightened to standard torque va lues listed aboveNOTES: 123456789Apply sealant to the threadsApply locking agent to the threadsStakeApply oil to the threads and flange su rfaceApply clean engine oil to the O-ringApply grease to the th reads and flange surfaceALOC bolt: replace with new on8Do not reuse; replace with new oneCastle nut: Tighten to the specified torque then tighten to position suitable for cotter pin ho le direction
THREAD DIA(mm)