1997-2004 Honda Fourtrax Recon TRX250TE/TM Service Manual, Page 59Get this manual
MAINTENANCE Check that the D-ring is in good condition, and
install the timing hole capTORQUE: 10 Nm (1.0 kgfm7Ibf ft) Install the removed parts in the reverse order of removal
After 2001:
Remove the fuel tank and heat guard (page 5-7),
Remove the valve adjusting hole caps from the
cylinder head coverRemove the timing hole cap from the left side of the rear crankcase cover (page 3-8),
Turn the crankshaft counterclockwise using the recoil starter knob, and align the "T" mark on the
flywheel ith the index mark on the rear crankcase cover (page 3-9), Make sure the piston is at TDC on the compression