1997-2001 Honda TRX250 Fourtrax Recon Service Manual, Page 155Get this manual
GEARSHIFT LINKAGE Install the sub-gears hift spindle and thrust washer from the rear crankcaseIf reverse stopper arm was removed, it must be installed before sub-gearshift spindle (page 9-8)
Install the return spring, washer and stopper arm into the crankcase so that arm lies below bearing edgeApply locking agent to the th reads of stopper arm boltInstall and tighten the stopper arm boltTORQUE: 12 Nm 11.2 kgfm, Ibfft)
If the return spring pin was removed, apply locki ng agent to the threads and instal itTORQUE: 22 Nm 12.2 kgfm 16 Ibfft)