1997-2001 Honda TRX250 Fourtrax Recon Service Manual, Page 62Get this manual
MAINTENANCE
STEERING SYSTEM
Place the vehicle on level ground with the front wheels facing straight aheadMark the centers of the tires with chalk to indicate the axle cen ter height Align the gauge with the marks on the tires as shown Check the read in gs on the gauge scalesSlowly move the vehicle back until the wheels have turned 180 so the marks on the tires are aligned with the gauge height on the rear sideMeasure the toe on the rear part of th tires at the same points with no load on th vehi cle TOE-IN: mm (516 in) NOTEToe-i means the rear measurement is greater than the front measurement