1989 Honda FL400R Pilot Service Manual, Page 238Get this manual
ELECTRIC STARTER INSTALLATION Install the starter motor with the two mounting bolts
TORQUE: 12 N'm 11.2 kg-m9 ft-Ib)
Connect the starter cable to the motor
Install the drive pully (page 10-81 Connect the negative cable to the battery
STARTER RELAY SWITCH
Depress the starter switch button with the ignition ON and engine stop switch is RUN positionIf the starter relay switch clicksmake on operation inspection
If the switch does not clickcheck the voltage and continuity
CONTINUITY INSPECTION
Disconnect the LgR wire connector
Check the continuity between the LgR wire of the wire
harness side and body groundThere shound continuity when the transmission is in neutral