1989 Honda FL400R Pilot Service Manual, Page 164Get this manual
REAR WHEEVSUSPENSIONDRIVE SHAFT
REAR WHEEL
REMOVAL
Place the vehicle on firm, level groundApply the parking brake and place the transmission in gear Align the jack head so the vehicle frame will fit in the recess as you false the jack Operate the jack until the rear wheel are slightly off the ground Place maintenance stands under the rear holding points as shown Lower the jack until the frame sits on the standsPlace support block under the frame
.haid petti! Al'oid
the l'pllidt, whiff it is Oil flu' jackIh PIlf{iflf' when rhp l'phil'le is supported
on(,- by thl' jackRemove the rear wheel nuts and rear wheel
INSTALLATION
Install the rear wheel with the tire valve facing out
Do not interchange the right and left tires; the arrow on the tire indicates the normal direction of rotation_ Install the wheel nuts with their curved sides facing inward and tighten to the specified torque_