1989 Honda FL400R Pilot Service Manual, Page 103Get this manual
BELT CONVERTER NOTE Mark the cover and movable drive face to indicate their original positions before removing the cover
Insert the special tool into the threaded bore with attachments stacked as shownThread the special tool in all the way until it seatsRemove the movable drive face cover bolts
The movable drive uee cover is under spring tension thut can cause injuryBe sure to use the special toolas described in this following procedure, to avoid injury
Loosen the special tool by turning it to turns counterclockwIseTap the outside edge of the movable drive face cover with plastic hammer or mallet until it pops off and away from the assembly from the spring tensionContinue turning the tool counterclockwise gradually while pushing down on the cover and remove the tools and drive face coverRemove the a-ring and drive pulley spring