1989 Honda FL400R Pilot Service Manual, Page 19Get this manual
LUBRICATION
ENGINE BALANCER OIL
OIL LEVEL
Place the vehicle on level groundCheck the oil level by removing the oil level check boltIf the oil does not flow out from the bolt hole, the oil level is low; Remove the oil filler cap and add the recommnded oil (page 2-1) until the oil flows out from the bolt holeMake sure the sealing washer on the check bolt is in good condition and tighten the boltTORQUE: 10 N'm (1.0 kg-m, ft-Ib) Reinstall the oil filler cap
OIL CHANGE
NOTE Warm-up the engine before draining the oil This ensures rapid and complete drainingRemove the balancer oil filler capPlace an oil drain pan under the engine to catch the oil, and remove the brain boltAfter the oil has been completely drained, check that the drain bolt sealing washer is in good condition and tighten the drain boltTORQUE: 25 N'm (2.5 kgm, 18 ftlb) Fill the engine with proper amount of the recommended oil, referring to the oil level check procedure