1989 Honda FL400R Pilot Service Manual, Page 12Get this manual
GENERAL INFORMATION
CABLEHARNESS ROUTING
Note the following when routing cables and wire harnesses: loose wire, harness or cable can be safety hazardAfter clamping, check each wire to be sure it is secure Do not squeeze wires against welds or the ends of clampsSecure wires and wire harnesses to the frame with their
respective wire bands at the designated locationsTighten the bands so that only the insulated surfaces contact the
wires or wire harnesses Route harnesses so they are neither pulled taut nor have excessive slackRoute wire harness so avoid sharp edges or cornersAlso avoid the projected ends of bolts and screws