1988-1994 Honda TRX300 Fourtrax, 1988, 1990-1994 TRX300FW Fourtrax Service Manual, Page 193Get this manual
FRONT WHEELSUSPENSIUNSTEERINli TRX300FW Insert the drive shaft into the knuckleConnect the knuckle to the front armsTighten the castle nuts to the specified torque TORQUE: 30-36 Nm (3.0-3.6 kg-m, 22-26 ft-Ib) Install new cotter pins
After '92: TRX300 Connect the knuckle to the upper and lower armsInstall and tighten the nuts to the specified torqueTORQUE: 30-36 Nm (3.0-3.6 kg-m, 22-26 ft-Ib) Install the new cotter pins
TIE-ROD ASSEMBLY
Install the unmarked ball joint and gold colored nut on the flat side of the tie-rod, and the "L" marked ball joint and silver nut in opposite sideSet the distance between the ball joints as specified belowSTANDARD SETTING: TRX300: '88-'92: After92: TRX300FW: