1988-1994 Honda TRX300 Fourtrax, 1988, 1990-1994 TRX300FW Fourtrax Service Manual, Page 143Get this manual
ALTERNATORSTARTER CLUTCHGEARSHIFT LINKAGE Install the left crankcase coverInstall and torque the left crankcase cover boltsTORQUE: 10 Nm (1.0 kg-m, ft-Ibl CAUTION
Be sure to install new sealing washer with the bolt near the .Amark
Connect the ignition pulse generator and alternator wire connectors
After '89: Install the gearshift pedal, aligning the punch marks on the pedal and shaftTighten the pedal bolt to the specified torqueTORQUE: 16 Nm (1.6 kg-m, 12 ft-Ibl Install the left foot pegTighten the four mounting bolts to the specified torque TORQUE: 33 Nm (3.3 kg-m, 24 ft-Ibl (31 LEFT FOOT PEG After '89: Install the following:skid plate (TRX300FWI- front drive side shaft and shaft cover (page 14-311 (TRX300FW)starter reduction gear (page 9-21Fill the engine with the recommended oil (page Make sure there are no oil leaks