1988-1994 Honda TRX300 Fourtrax, 1988, 1990-1994 TRX300FW Fourtrax Service Manual, Page 128Get this manual
CLUTCHOIL PUMPKICK STARTER Install the cable holder with the right crankcase cover boltTORQUE: 10 Nm (1 .0 kg-m, ft-Ib) NOTE Clamp the wire with the cable holder prope rly as shown
Install the reverse stopper lever ith its "OUT" mark faoing out Install and tighten the reverse stopper shaft bolt
Install the switch cover and the right foot pegTORQUE: 33 Nm (3.3 kg-m, 24 ft-Ib) Install the skid plate (TRX300FW)
Install the kick starter pedal to the shaft, aligning the punch marks of the pedal and shaft
Install the oil path pipe at the top using special bolt, lock washer and new sealing washer Attach the lower end of the oil path pipe using special bolt and new sealing washers Torque the special bolts TORQUE: Oil path pipe bolt (oil control bolt): 12 (1.2 kg-m, ft-Ib) Secure the oil path pipe using the mounting bolt as shownTighten the bolt securely Adjust the clutch and reverse cable (page 3- 14, 15)Fill the engine with oil (page 2-3)Check the clutch and gearshift pedal for smooth operation Make sure there are no oil leaks