1987 Honda Fourtrax TRX 250X Service Manual, Page 148Get this manual
FRONT WHEELSUSPENSIONSTEERING Apply cement over the srea marked and allow it to dryRemove the lining from the patch and center it over the injuryPress the patch against the injury using special roller
Allow cement to dry until tacky before applying patchDo not touch the cement with dirty or greasy hands
TIRE ASSEMBLY
After removing the tire from the rim, cut the valve off at the bottombeing careful not to damage the rim
Be sure to replace the valve with new one whenever the tire is removed from the rim
Install new valve into the valve hole in the rimClean the rim bead seat and flangesApply clean water to the rim flanges, bead seat and baseInstall the tire on the rim
Uu only "'ater as lubricant when mounting liresSoap or some mounting lubricants mDy residue which CDn cause the tire to shift on the rim and lose Dlr pressure during ridingInstall the tire to seat the tire bead ,