1987 Honda Fourtrax TRX 250X Service Manual, Page 106Get this manual
CLUTCHOIL PUMPKICK STARTER Install he washer and new lock nut
T ighten he lock nutTOROUE: 100- 120 N'm (10.0120 kg -m 7287 ftlbl TOOLSClutch center holder Lock nut wrench, 17 mm
(4) CENTER PUNCH
Exten sion bar
0792KE1000 (Not available In U.S.A 0771 6- 00203 00 or equi valen ava ilable in U.S.A 077160020500 or equivalent available in U.S.A
(5) LOCK NUT
If the CLUTCH CENT ER HOLDER, 07923-KE10000 is not available, shift tha transmission into gear and use the UNIVERSAL HOLDER07725-0030000 to hold the drive sprocket
Stake the lock nut using center punchInstall the washer, release bearing and snap ring onto the clu ch lifter plate Install the clutch springs, lifter plate and clutch bolts Tighten the bolts in criss-cross pattern in -3 stepsTOROUE: 1014 N' (1 .0.4 kg.m- ftlb)