1986-1989 Honda TRX250 FourTrax 250R Service Manual, Page 194Get this manual
HYDRAULIC DISC BRAKES ''07:
Connect the rear brake hose with the oil bolt and two new sealing washers, and tighten the oil bolt
After ''07:
TORQUE: 25-35 N'm 12.5-3.5 kg-rn, 18-25ft-lb)
Connect the master cylinder push rod and rear brake pedal with the joint pin and secure it with new cotter pinFill and bleed the rear hydraulic system (page 13-4)
REAR BRAKE PEDAL
REMOVAL
Disconnectthe rear brake pedal from the master cylinder push rod by removing the cotter pin and joint pin'86, '87: Remove the right footpeg mounting bolts and the right footpegAfter '87: Remove the cotter pinRemove the rear brake pedal and return springCheck the rear brake pedal pivot and pivot shaft for wear or damage