1986-1989 Honda TRX250 FourTrax 250R Service Manual, Page 154Get this manual
REAR WHEELDRIVE MECHANISM After '87: Remove the O-ring from the bearing holder ri)ht side Loosen th four socket bolts
(2 SOCKET BOLTS
'86, '87 Shown:
Remove the bearing holder from the swingarmRemove the O-rings from the grooves In the bearing holder
(1) O-RINGS
BEARING INSPECTION
Turn the inner race of each bearing with your fingerThe bearing should tu rn smoothly and quietlyAlso check th at th bearing outer race fits tightly in the holderRemove and discard the bearings if the races do not turn smoothlyquietly, or if they fit loosely in the holder