1986-1989 Honda TRX250 FourTrax 250R Service Manual, Page 122Get this manual
FRONT WHEELSUSPENSIONSTEERING Install the front brake master cylinder with the "UP" mark on the holder facing upAlign the end of the holder with the punch mark on the handlebar, and tighten the upper screw fi rst th en tighten the lower screw
TORQUE: 10-14 Nm (1.0-1.4 kg-m, 7-10 ft-Ib)
Place the th rottle housing on the handlebar and loosely install the holder and screwsAlign the punch mark on the housing with the mating surface of the master cylinder holder, and tighten the forward screw firstthen tighten the rear screwPerform the following inspections after installing the handlebar- clutch lever free play (page 2-14)thr.ottle lever free play and return (page 2-4)operation of parking brake leve (page 2-13)function of handlebar switch (page 15-9)operation of front brake lever