1986-1987 Honda TRX350 FourTrax 4X4, 1987-1989 TRX350D Foreman 4X4 Service Manual, Page 239Get this manual
FRONT DIFFERENTIALFINAL DRIVE Install the ring gear shah with the spacer into the coverIt may be necessary to press the ring gear into the cover bearing
(1) RING GEAR
'-""f""""""''J'''iii===='_ (2) SPA ER
Measure the clearance between the ring gear and the ring gear stop pin with feeler gaugeCLEARANCE: 0.30-0.60 mm (0.012-0.024 inl
Remove the ring gearIf the clearance exceeds the service limit, heat the gear case cover to approximately aoc (176 F) and remove the stop pin by tapping the cover(1) RING GEAR
Always wear gloves when handling the gear case aler if has been heated to prevent burning your handsInstall stop pin shim to obtain the correct clearanceSHIM THICKNESS: A: 0.10 mm (0.004 inl B: 0.15 mm (0.006 inl Install the shim and drive the stop pin into the case cover