1986-1987 Honda TRX350 FourTrax 4X4, 1987-1989 TRX350D Foreman 4X4 Service Manual, Page 216Get this manual
REAR WHEELSUSPENSION Remove the pivot lock nut
TOOL: Pivot lock nut wrench
07908-4690001 or KSHBA-08469 (U.S.Aonly)
Remove the pivot bolt
TOOL: Socket bit17 mm
07703-0020500 or equivalent commercially available in U.S.A
Remove the swingarm from the frame af1d disconnect the drive shaft from the engine
PIVOT BEARING REPLACEMENT ('86)
After86the bearings are loose against the sw ingarm, and dust seal is installed to the bearing as an assembly
Remove the dust seal and bearingRemove the outer race from the swingarm using the bearing remover as shown