1986-1987 Honda TRX350 FourTrax 4X4, 1987-1989 TRX350D Foreman 4X4 Service Manual, Page 212Get this manual
REAR WHEELSUSPENSION Remove the brake shoes, arm and cam from the brake panel (pages 13-12 and 13-13)Drive the bearings out
TOOLS: Driver Ball race driver
077 490010000 07945- 3330300
Press the new bearings into the panel with the sealed side facing outward
TOOLS: Attachment, 52 55 mm Pilot, 28 mm Driver
07746 -0010400 07746 -0041100 07749-0010000
INSTALLATION
Insert the rear axle into the final gear through the axle housing (right side)Install the bearing stopper onto the left end of the axle with chamfered face outInstall new O-ring onto the bearing housing
HOUSING Install the bearing housing and tighten the joint nuts
TORQUE: '86, '87: 60-80 Nm (6.0-8.0 kg-m, 43-58 ft-Ib) After '87: 35-45 Nm (3.S-4.S kg-m, 2S-33 ft-Ib)
Install the rear skid plate and tighten the mounting bolt securelyInstall and tighten the left shock absorber lower mounting boltnut