1986-1987 Honda TRX350 FourTrax 4X4, 1987-1989 TRX350D Foreman 4X4 Service Manual, Page 175Get this manual
FRONT WHEELSUSPENSIONSTEERING Press the new bearings into the knuckle with the special tools TOOLSDriver Attachment, 52 55 mm Pilot, 28 mm ('86, '871 Pilot, 30 mm (After '871 NOTE Be careful not to damage the knuckle bore surface (3) SNAP RING
077490010000 07746-0010400 07746-0041100 07746-0040700
Install the snap ringDrive each dust seal into the knuckle with the lip toward the outsideApply mUltipurpose grease to the lips of the dust seals
KNUCKLE HOLDERDRIVE SHAFT REMOVAL
NOTE The knuckle holder is an assembly with the pivot bearingsIf the knuckle holder is damaged, replace the assemblyRemove the guard plate by removing the bolts (page 2-3)Remove the brake hose clamp and pull out the drive shaftRemove the knuckle holder by removing fou nuts(2) KNUCKLE HOLDER