1986-1987 Honda TRX350 FourTrax 4X4, 1987-1989 TRX350D Foreman 4X4 Service Manual, Page 169Get this manual
FRONT WHEELSUSPENSIONSTEERING Keep the breaker arm horizontal and align the end of the compressor bait with the arm hole
Screw in the breaker arm compressor bolt to break the bead from the ti re, If the rest of the bead cannot be pushed down into the center of the rim, remove and reposition the compressor and arm 18 to 14 the circumference of the rim Tighten the compressor bolt to break the beadRepeat this procedure as necessary until the remainder.of the bead can be pushed down into the center of the rim
if the bead breaking is difficul with the narrow end (A side) of the breaker armuse the wide end (8 side) of the arm and repeat the procedure above