1986-1987 Honda TRX350 FourTrax 4X4, 1987-1989 TRX350D Foreman 4X4 Service Manual, Page 135Get this manual
11CRAN KCASECRANKSHAFTITRANSM ISSION SERVICE INFORMATION TROUBLESHOOTING CRAN KCASE SEPARATION CRAN KSHAFTIBALANCER
11-1 11-3 11-4 11-5
TRANSMISSION
11-8 11-13 1114
CRANKCASE ASSEMBLY OUTPUT GEAR
SERVICE INFORMATION
GENERAL
For crankshaft and transmission repair, the crankcase must be separated Remove the following parts before separating the crankcase Cylinder head (section 7) Cyl inder and piston (section 8) Clutch, oi pump and kick starter (section 9) Starter motor (section 19) Alternator and gearshift linkage (section 10) Use soft jaws to prevent damage to the output gear case when placing the case in vise When replacing the following output gear components, new adjustment shim must be selected Output gear case Output gear assembly Output gear bearing Output gear bearing holder Replace the output drive and driven gears as set When using the lock nut wrenchuse deflecting beam type torque wrench 20 inches longThe lock nut wrench increases the torque wrench's leverage, so the torque rench reading will be less than the torque actually applied to the lock nutThe specification given is the actual torque applied to the lock nut, not the reading on he torque wrench when used with the lock nut wrench The torque scale reading is given with the actual torque specifications