1985 Honda Odyssey 350 FL350R Shop Manual, Page 26Get this manual
MAINTENANCE If the toe-out of the front wheel exceeds the limit, adjust it by changing the length of the tie-rods equally, then remeasure(page 10-13)If toe-in of the rear wheel exceeds the service limit, adjust it with the radius arm pivot bolt washerNOTE The number of washers must be one or zero for one sideIf it is necessary to use two washers on one side, check the frame and radius arm for signs of bending
(2) RADIUS ARM PIVOT BOLT
Measure the camber of the front and rear wheels NOTE Place the vehicle on levei ground and adjust all shock absorber spring adjusters to the standard position (III) to measure and adjust the camber and caster properlyFront wheel camber is not adjustable