1985-1987 Honda TRX 250 Fourtrax 250 Service Manual, Page 164Get this manual
BRAKES Install the brake backing plate with four boltsNOTe Make sure the GOLD anodized adjuster is on your leh Apply silicone grease on the metal contact areas indicated (21 GOLD AN(lDl;
Install the brake shoes, springs, pins and pin holdersNOTE Do not get grease or oil on the brake lining surlace Install the black spring below the spindle
Install the brake drumaxle nut and cotter pin (page 12 51Fill the brake flu id reservoir and bleed the brake system (page 1231 NOTE The master cylinder reservoir must be full at the start of bleeding and checked afterwardsInstall the wheel (page 61 and adjust the brake shoe lining todrum clearance