1985-1986 Honda ATC250R Shop Manual, Page 208Get this manual
HYDRAULIC DISC BRAKES
Coat the caliper pins with silicone grease and install the caliper bracket to the caliperInstall the front brake pads (Page 13-7)
SILICONE GREASE
HOSE CLAMP Connect the front brake hose to the caliper with the oil bolt and two new sealing washers, and tighten the oil boltTORQUE: 25-35 Nm (2.5-3.5 kg-m, 18-25 ft-Ib) Route the front brake hose as shown, and install the front brake hose clamp onto the front forkFill the front brake reservoir and bleed the front brake system (Page 13-4)
BRAKE HOSE
REAR CALIPER
REMOVAL
Drain the brake fluid from the rear hydraulic systemRemove the oil bolt and rear brake hose from the rear brake caliperCAUTIONI