1984 Official Honda TRX200 Shop Manual, Page 218Get this manual
r::ij HONDA TRX200 Tighten the cover bolts in 2-3 steps until the cover evenly touches the gear case, then tighten the bolts to the specified torque in criss-cross pattern in two or more stepsTORGUE24-30 N'm (2.4-3.0 kg-m, 17-22 ftlb)
REAR WHEELFINAL DRIVE
Remove the oil filler cap from the final gear caseRotate the ring gear several times in the normal direction of rotationCheck the gear tooth contact pattern through the oil fi lIer holeThe pattern is indicated by the Prussian Blue applied to the pinion before assemblyContact is normal if the Prussian Blue is transfered to the approximate center of each tooth and slighly to the flank side