1983-1985 Original Honda ATC 200X Shop Manual, Page 187Get this manual
BRAKE MECHANISM REAR CALIPER INSTALLATION Install the caliper over the disc so the disc is positioned between the pads, being careful not to damage the padsInstall and tighten the caliper mount bolts
MOUNT BOLTS
TORQUE: 20-30 Nm (2.0-3.0 kg-m, 14-22 ft-Ib)
Route the end of the parking brake cable through the parking brake assemblyConnect the cable end of the parking brake armAlign the punch mark on the back of the arm with the punch mark on the shaft of the parking brake assembly, and install the arm onto the shaft