1983-1985 Original Honda ATC 200X Shop Manual, Page 141Get this manual
FRONT WHEELFRONT FORKSTEERING
Clean the hex bolt threads and apply locking agent to the threadsNOTE: To tighten the hex bolt, it may be necessary to install the fork springs and tighten the fork cap temporari IyTake case not to distort the slider in the viseTORQUE: 15-25 Nm (1.5-2.5 kg-m, 11-18 ft-Ib)
HEX WRENCH, mm
07917-3230000 or equivalent
Install the oil seal into the top of the sliderApply ATF to the oil seal and drive it in with the fork seal driverNOTE: Use the old oil seal with fork seal driver attachment to install the new oil sealThe fork seal is seated when the groove in the slider is seen at top of the sealImtall the snap ring and dust seal