1983-1985 Original Honda ATC 200X Shop Manual, Page 131Get this manual
FRONT WHEELFRONT FORKSTEERING TIRE REMOVAL (Not available in U.S.A
NOTE: This service requires the Tire Bead Breaker (07772-0040000) not available in U.S.A
CAUTION: Do not apply water, soap water, oil etcto the tire, rim and tool when removing the tireThe tool breaker arm may slip off the tire and the bead can not be broken off the tireDo not damage the bead seating area of the rimFollow the breaker manufacturer's instructionsI nsert the narrow end (A side) of the breaker arm between the tire and the rimPosition the breakElr arm compressor onto the rim center as shownKeep the breaker arm horizontal and align the end of the compressor bolt with the arm holeScrew in the breaker arm compressor bolt to break the bead from the tireIf the rest of the head cannot be pushed down into the center of the rim, remove and reposition the compressor and arm .18 to 14 the circumference of the rimTighten the compressor bolt to break the beadRepeat this procedure as necessary until the remainder of the bead can be pushed down into the center of the rim=