1983-1985 Original Honda ATC 200X Shop Manual, Page 96Get this manual
CLUTCHOIL PUMPGEARSHIFT LINKAGE SPINDLE nstall the kick starter drive gear onto the spindle, aligning the punch marks on the gear and spindle
PUNCH MARKS DRIVEN GEAR Install the thrust washers on both sides of the kick starter drive gearInstall the kick starter drive gear and spindle in the right crankcase cover, aligning the punch marks on the kick starter drive and driven gearsNOTE: The drive gear diammeter was changed from 50.8 ('83) to 47.9 mm (After 1983)The driven, gear diameter was changed from 45.1 ('83) to 47.8 mm (After 1983)If one 1983 gear is damaged, both gears must be replaced with parts (After 1983)