1983-1985 Original Honda ATC 200X Shop Manual, Page 88Get this manual
CLUTCHOIL PUMPGEARSHIFT LINKAGE
Check for plate warpage on surface plate, using feeler gaugeSERVICE LIMIT: 0.20 mm (0.008 in) Check the slots in the clutch center for nicks or indentations made by the clutch platesReplace if necessary
INSTALLATION
Install the primary drive gearInstall the clutch outerInstall the spline washerAssemble the pressure plate, discs, clutch plates and clutch centerNOTE:-the plat-es alternately Coat new clutch discs with engine oil-