1982-1983 Official Honda ATC 200E Big Red Shop Manual, Page 78Get this manual
HONDA CYLI DERSTON
ATC200E
Inse rt each piston ring into the cylinder and measure the ring end gap STANDARD: TOPSECOND.20- 0.40 mm (0 .008- 0.016 in) OIL.30.90 mm (0 .012.035 in) SERVICE LIMIT: TOPSECOND.50 mm (0.020 in)
Measure the piston diameter at the skirt NOTE Measu re the piston diameter 10 mm from the bottom and 90' to the piston in hole
Calculate the piston -to -cylinder clearance STANDARD: 64 .955- 64 .985 mm (2 .5573- .5585 in) Refer to pagefor cylinder bore inspection SERVICE LIMIT: 64 .90 mm (2 .551 in)