1982-1983 Official Honda ATC 200E Big Red Shop Manual, Page 22Get this manual
MAINTENANCE Inspect the intake and exhaust valve clearca nces by inserting th feel er gauge between the adjusting screw and valve stem VALVE CLEARANCESIntake: 0.05 mm (0.002 in) Exhaust: 0.05 mm (0 .002 in) LOCK NUT
ATC200E
ADJUSTING SCREW
VALVE ADJUSTING WRENCH (1 Ox 12 mmAdjust by loosening the lock nut and turning the adjusting screw unti there is slight drag on the feeler gauge Hold the adjusting screw and tighten the lock nutTORQUE: 15- 18 Nm (1 .5.8 kg -m
1113 ft-Ib)
Recheck the valve clearance install the valve adjuster covers TORQUE- 12 Nm (0.8.2 kg -mft-Ib) Install the timing hole cap