1982-1983 Official Honda ATC 200E Big Red Shop Manual, Page 14Get this manual
LUBRICATION
ATC200E
UPPER LEVEL
ENGINE OIL LEVEL CHECK
Place the ATC on level ground Check the oil level with the oil capdipstick Do not screw in the cap when making this check If the oil level is below the lower level mark on the dipstick, fill to the upper level mark with the recommended oil (Page1)
LOWER LEVEL
ENGINE OIL CHANGE AND OIL FILTER SCREEN CLEANING
NOTE Drain the oil with the engine warm The oil filter screen and spring will come out when the oil fi lter screen cap is removed Remove the oil filler cap and oil filter screen cap Operate the recoil starter several times to completely drain any residual oilClean the oil filter scree Make sure that the oil filter screensealing rubber screen cap and -ring are in good condition Install the oil filter screenspring and screen cap TORQUE- 15 Nm (0 .9 -15 kg -m ,