1980-1981 Honda Odyssey FL250 Shop Manual, Page 51Get this manual
8 ENGINE
Spider removal for servicing the fixed fal'ce and hub, movable face assembly or the spider can be performed as per detailled instructionsHowever, it is impractiical in most cases, !i.eif the movable face is worn, dictating replacement, the f,ixed face and hub will probably be iin the same conditionIt is usually less ,expensive to replace the entire drive puUey when the faces require r,eplacement
SCREW (14-20 2-34) (Salsbury #900403)
STEP PLUG (Salsbury #704232)
IDisassembly: (D Place the stepped thrust block into the threaded end of the drive hub, p;lace the puliler assembly into pos,iti;on (cupped side down) and run the three (114-20) puller bahs full'y into the threaded holes in the spider with 716 inch or 11 mm open end wrench