2006 Bombardier Outlander Max Series Factory Service Manual, Page 427Get this manual
Section 12 BODYFRAME Subsection 01 (BODY)
GENERAL
During assemblyinstallation, use the torque value and service products as in the exploded viewsClean threads before applying threadlockerRefer to SELF-LOCKING FASTENERS and LOCTITE APPLICATION at the beginning of this manual for complete procedure
CAUTION: Avoid use of harsh detergents such as strong soaps, degreasing solvents, abrasive cleaners, paint thinners, etcthat may cause damage to the seat cover
Removal
Passenger's Seat Outlander MAXMAX XT ModelsPull one of the passenger's seat latch levers no4Those levers are located underneath the RH or LH rear end of seat&
WARNING
Torque wrench tightening specifications must strictly be adhered toLocking devices (e.g locking tabs, elastic stop nuts, self-locking fasteners, etc must be installed or replaced with new ones where specifiedIf the efficiency of locking device is impaired, it must be renewedPlastic Rivet Plastic rivet no1 are used in the riveting of the various body partsPlastic rivets can be removed carefully with pliers Oetiker 1099 (PN 295 000 070) NOTE: Reuse the plastic rivets