2006 Bombardier Outlander Max Series Factory Service Manual, Page 415Get this manual
Section 11 BRAKES Subsection 01 (FRONT AND REAR BRAKES)
Installation
For installation, reverse the removal procedureApply XP-S synthetic grease (PIN 293550010) on both a-rings and into brake pedal
BRAKE HOSES
Inspection
Brake hoses should be inspected frequently for leaks and damagesCheck if the hoses are crushed or damagedAny deformation can restrict the proper flow of fluid and cause braking problemsCheck hoses for cracking or scrapesThis damage can cause hose failure under pressure When hoses are removed or disconnected, cleanliness must be observedClean all joints and connections before disassemblyNew hoses should be cleaned with brake fluid before installation to remove any contaminationReplace any defective parts _