2006 Bombardier Outlander Max Series Factory Service Manual, Page 413Get this manual
Section 11 BRAKES Subsection 01 (FRONT AND REAR BRAKES)
NOTE: Be careful not to damage pads and make sure pads are correctly inserted in their location After the Job is completed, firmly depress the brake lever few times to bring the pads in contact with the disc V02KOFA
7Hollow place
Check for leaks and ma ke sure the brakes operate normally before driving The pads must rest flat on the disk
BRAKE PAD MINIMUM THICKNESS
1 mm (132 in)
BRAKE DISC
Inspection
Brake discs no21 can be inspected ithout removing them from the vehicleRaise vehicle and support it securelyRemove wheels and visually inspe'ct disc surfaces for scratches or grooves Make sure to check both sides of discMeasure thickness of the disc DISC MINIMUM THICKNESS
Front 35 mm138 in) 4.3 mm(170in)
WARNING
Avoid getting oil or grease on brake padsContaminated brake pads can affect stopping ca pacities
CAUTION: Brake pads must always be replaced in pairs