2006 Bombardier Outlander Max Series Factory Service Manual, Page 351Get this manual
Section 08 DRIVETRAIN Subsection 02 (FRONT DRIVE)
GENERAL
The procedure explains below is the same for the RH and LH sides unless otherwise instructedDuring assemblyinstallation, use torque values and service products as in the exploded viewsClean threads before applying threadloc kerRefer to SELF-LOCKING FASTENERS and LOCTITE APPLICATION at the beginning of this manual for complete procedure
WARNING
Torque wrench tightening specifications must strictly be adhered toLocking devices (e.g locking tabs, elastic stop nuts, self-locking fasteners, etc must be installed or replaced with new ones where specifiedIf the efficiency of locking device is impaired, it must be renewed
CAUTION: Always use the recommended wheel nuts Using different nut could cause damages to the rimOutlander 800 Series
PROCEDURES
On these models, wheel balancing is necessaryTo perform this operation, use wheel balancer and adhesive weights
TIRES AND WHEELS