2006 Bombardier Outlander Max Series Factory Service Manual, Page 293Get this manual
Section 07 TRANSMISSION Subsection 01 (CONTINUOUSLY VARIABLE TRANSMISSION (CVT))
7Bushings 2Backside of sliding half of driven pulley
vmr2006-021 -039_a
BUSHINGS BORE DIAMETER
NOIVIINAL SERVICE LIMIT 30.060 to 30.100 mm (11 83 to 1.185 in) 30.200 mm (1.189 in)
A Measurement ins ide BMeasurement outside
WEAR ON TEETH BOTH SIDES
SERVICE LlIVIIT
7.500 mm (.295 in)
Fixed Half Check fixed half for cracks and excessive wearReplace fixed half if necessaryCheck ball bearing for free play and smooth operationReplace if necessaryCheck shaft for heavy wear or visible damageReplace if necessaryIf the shaft is removed, using dial bore gauge, measure bushing diameterMeasuring point must be at least mm (14 in) from bushing edgeThis bushing can not -be replacedReplace fi xed hali ii bushing no_ 18 is out of specification Visually inspect coatingsBUSHING BORE DIAMETER