2006 Bombardier Outlander Max Series Factory Service Manual, Page 291Get this manual
Section 07 TRANSMISSION Subsection 01 (CONTINUOUSLY VARIABLE TRANSMISSION (CVT))
Using the clutch holding tool (PIN 529 035 771), hold the driven pulley during the removal of the driven pulley screwDo not remove screw completely529035771
Remove the driven pulley with the spring, cam and the plate
1Driven pulley screw 2Clutch holding tool
1Fixed half of driven pulley 2Sliding half of driven pulley 3Spring 4Cam 5Plate
Push the driven pulley and maintain it in this position during the removal of screwRemove driven pulley screw and washer