2006 Bombardier Outlander Max Series Factory Service Manual, Page 288Get this manual
Section 07 TRANSMISSION Subsection 01 (CONTINUOUSLY VARIABLE TRANSMISSION (CVT))
CENTRIFUGAL LEVER PIVOT BOLT DIAMETER NOMINAL SERVICE LIMIT
6.078 to 6.100 mm (.239 to .240 in) 6.00 mm (.236 in)
Centrifugal Lever Check bushing diameter in the centrifugal lever no7 for wearReplace centrifugal lever if necessaryCENTRIFUGAL LEVER BORE DIAMETER NOMINAL SERVICE LIMIT
6.035 to 6.078 mm (238 to .239 in) 6.200 mm (244 in)
ACentrifugal lever pivot bolt bore diameter
Replace centrifugal lever with thrust washers, screws and lock nuts if the contact surfaces show heavy visible wear
CENTRIFUGAL LEVER PIVOT BOLT BORE DIAMETER NOMINAL SERVICE LIMIT
6.113t06 .171 mm (241 to .243 in) 6.300 mm (248 in)
Measure bushing diameters of sliding halfUse dial bore gauge to measure bushing diameterMeasuring point must be at least mm (14 in) from bushing edgevmf2006021}19_1