2006 Bombardier Outlander Max Series Factory Service Manual, Page 287Get this manual
Section 07 TRANSMISSION Subsection 01 (CONTINUOUSLY VARIABLE TRANSMISSION (CVT))
WARNING
Roller and Slider Shoe Check each roller for roundness of external diameterCheck if rollers move freely
This procedure must be performed in wellventilated area
CAUTION: Avoid contact between cleaner and crankshaft seal because damage may occurRemove all hardened oil deposits that have baked on crankshaft and pulley tapered surfaces with coarse or medium steel wool andor sand paper no600CAUTION: Do not use any other type of abrasiveReclean mounting surfaces with paper towel and pulley flange cleaner (PN 413 711 809) Wipe off the mounting surfaces with clean, dry paper towel
CAUTION: Whenever replacing rollers and slider shoes, always replace all rollers and slider shoes at the same timeCheck slider shoes for visible wear and replace if damagedNOTE: If necessary, use screwdriver to remove slider shoes