2006 Bombardier Outlander Max Series Factory Service Manual, Page 285Get this manual
Section 07 TRANSMISSION Subsection 01 (CONTINUOUSLY VARIABLE TRANSMISSION (CVT))
NOTE: Use protection plates to avoid marks andor damages to the governor cup
CAUTION: Always replace all rollers at the same timePartly worn rollers may cause damage to the CVT system
vmr2006-021-013_8
1Drive pulley puller 2Fixed half
Disassembly
Governor Cup Carefully lift governor cup no3 until slider shoes no4 come at their highest position into guidesNOTE: The following procedure is not necessary except if roller must be removed Refer to INSPECTION before proceedingRemove slider shoes out of each bearing sleeveUse flat screwdriver if necessary1Punch 2Vice