2006 Bombardier Outlander Max Series Factory Service Manual, Page 273Get this manual
Section 07 TRANSMISSION Subsection 01 (CONTIIIUOUSLY VARIABLE TRAIISIVIISSION (CVT))
NOTE: Replace governor cup if the roller does not move freelyMeasure the roiler diameterIf roller is out of specification, replace all rollersROLLER OUTER DIAMETER NOMINAL SERVICE LIMIT
13.70 to 13.90 mm (.539 to .547 in) 13.20 mm (519 in)
ROLLER INNER DIAMETER NOMINAL SERVICE LIMIT
8.05 to 8.15 mm (.317 to .321 in) 9.00 mm (.354 in)
R400mOlr170A
1Contact surface to the roller
WARNING
Centrifugal Lever Pivot Bolt Measure diameter of centrifugal lever pivot bolt no14, replace if it is out of specificationWhenever replacing centrifugal levers, always replace all levers at the same timeOtherwise, the drive pulley will be unbalanced (because of lever differences)Slider Shoe Check slider shoes for visible wear and replace if damaged
R4QOmotrlS9A