2006 Bombardier Outlander Max Series Factory Service Manual, Page 261Get this manual
Section 06 ELECTRICAL SYSTEM Subsection 05 (LIGHTS, INSTRUMENTS AND ACCESSORIES)
1Light beam center A5 (17 t) B131 mm (5 in)
Adjustment Turn adjustment screws to adjust beam height and side orientation as described belowAdjust both headlamps evenlyTYPICAL
Properly reinstall removed parts in the reverse order of their removalValidate headlamp operation
Headlamp Beam Aiming
Select high intensityBeam aiming is correct when center of high beam is 131 mm (5 in) below the head lamp horizontal center line, scribed on test surface, (17 ft) awayNOTE: Sit down the driver or place the same weight on the vehicle TYPICAL 1Headlamp co ver 2Adj ustment screws